Skip to main content Skip to navigation
Hamburger Menu
Search icon
Country Selector Country Selector
France (English)
Profile Icon Profile Icon
Sign-in/Register UserName
test redirect

nand

Products

Solutions

Discover & Learn

Resources & Tools

Support

Search icon Search icon
Close Menu
      Alert Icon
      Human IL-12p70 Flex Set

      BD™ Cytometric Bead Array (CBA) Human IL-12p70 Flex Set

      (RUO)
      Human IL-12p70 Flex Set
      Figure 1. Example BD CBA Human IL-12p70 Flex Set standard curve. Data acquired on a BD FACSArray bioanalyzer and analyzed using FCAP Array Software.
      Human IL-12p70 Flex Set
      Reproducibility: The inter-assay and intra-assay reproducibility were determined for the BD CBA Human IL-12p70 Flex Set by evaluating ten replicates of three different sample levels (intra-assay) and two replicates of three different sample level from four separate experiments (inter-assay).
      Human IL-12p70 Flex Set
      Recovery: Cell culture supernatant, serum, or EDTA-treated plasma were spiked with three different levels of protein. The spiked samples were assayed and the results were compared with expected values. Serum and plasma samples were diluted 1:4 before the protein was spiked into each. Serum is a pool of 800 - 1000 donors and the plasma was pooled from at least 20 donors.
      Human IL-12p70 Flex Set
      Linearity: Cell culture supernatant, 1:4 diluted serum, or 1:4 diluted EDTA-treated plasma were spiked with protein and serially diluted. The diluted samples were assayed and the results were compared with the original spiked sample.
      Human IL-12p70 Flex Set Human IL-12p70 Flex Set Human IL-12p70 Flex Set Human IL-12p70 Flex Set
      Figure 1. Example BD CBA Human IL-12p70 Flex Set standard curve. Data acquired on a BD FACSArray bioanalyzer and analyzed using FCAP Array Software.
      Reproducibility: The inter-assay and intra-assay reproducibility were determined for the BD CBA Human IL-12p70 Flex Set by evaluating ten replicates of three different sample levels (intra-assay) and two replicates of three different sample level from four separate experiments (inter-assay).
      Recovery: Cell culture supernatant, serum, or EDTA-treated plasma were spiked with three different levels of protein. The spiked samples were assayed and the results were compared with expected values. Serum and plasma samples were diluted 1:4 before the protein was spiked into each. Serum is a pool of 800 - 1000 donors and the plasma was pooled from at least 20 donors.
      Linearity: Cell culture supernatant, 1:4 diluted serum, or 1:4 diluted EDTA-treated plasma were spiked with protein and serially diluted. The diluted samples were assayed and the results were compared with the original spiked sample.
      Product Details
      Down Arrow Up Arrow


      BD™ Cytometric Bead Array (CBA)
      E5
      10-2,500 pg/mL
      Human (QC Testing)
      RUO
      AB_2869137


      Description

      The BD™ CBA Human IL-12 p70 Flex Set is a bead based immunoassay capable of measuring human interleukin-12p70 (IL-12p70) in serum, plasma, and cell culture supernatant samples. Human reactivity was determined by testing samples with the BD CBA Human IL-12p70 Flex Set. The biology and function of IL-12p70 has been extensively reviewed in the literature. For more information on bead-based immunoassays, refer to the product insert for the BD CBA Human Soluble Protein Master Buffer Kit (Cat. No. 558264 or 558265).

      Preparation And Storage

      This BD™ CBA Flex Set contains one vial each of Capture Bead and PE Detection Reagent and two vials of Standard. The Capture Bead and PE Detection Reagent components of this flex set have been formulated to a 50x concentration to ensure product performance when multiplexed. The Standard component is lyophilized and should be transferred to a 15 mL polypropylene tube for reconstitution. When reconstituted in 4.0 mL Assay Diluent, the standard has a protein concentration of 2,500 pg/mL. Discard unused reconstituted standard, do not store or reuse. Store lyophilized standard and other components at 4°C. Protect Capture Beads and the PE Detection Reagent from prolonged exposure to light.
      Show More blue down arrow Show Less blue up arrow

      Recommended Assay Procedures

      The BD CBA Human IL-12p70 Flex Set must be used in conjunction with a BD CBA Human Soluble Protein Master Buffer Kit (Cat. No. 558264, 100 tests, or 558265, 500 tests), a flow cytometer, and FCAP Array™ Software.  Detailed instructions on the use of this product can be found in the manual for the BD CBA Human Soluble Protein Master Buffer Kit. When following the directions in the Master Buffer Kit, the top standard point for the BD CBA Human IL-12p70 Flex Set will be 2,500 pg/mL. An example standard curve is shown in Figure 1.

      The BD CBA Human IL-12p70 Flex Set cannot be used in the same assay well with the following BD CBA Human Soluble Protein Flex Set reagents:

      Flex Set                                                Bead Position                Catalog Number

      BD CBA Human IL-12/IL-23p40 Flex Set        E5                         560154

      The BD CBA Human IL-12p70 Flex Set should not be used in the same assay well with any non-BD CBA Human Soluble Protein Flex Set reagents (such as BD CBA Mouse Soluble Protein or Cell Signaling Flex Sets). For an updated assay compatibility chart for the BD CBA Human Soluble Protein Flex Sets, please refer to the BD CBA Flex Set System homepage at http://www.bdbiosciences.com/cbasetup.

      Performance

      Limit of Detection: The theoretical limit of detection is 0.6 pg/mL and was determined by evaluating the estimated result of the average MFI of the negative control (0 pg/mL, n=30) + 2 standard deviations.

      Show More blue down arrow Show Less blue up arrow

      Product Notices

      1. ProClin is a trademark of Rohm and Haas Company.
      2. Source of all serum proteins is from USDA inspected abattoirs located in the United States.
      3. Caution: Sodium azide yields highly toxic hydrazoic acid under acidic conditions. Dilute azide compounds in running water before discarding to avoid accumulation of potentially explosive deposits in plumbing.
      4. Warning: CBA lyophilized standard contains 0.02% (w/w) of a CMIT/MIT mixture (3:1), which is a mixture of:5-chloro-2-methyl-4-isothiazolin-3-one [EC No 247-500-7] and 2-methyl-4-isothiazolin-3-one [EC No 220-239-6] (3:1).Hazard statement: May cause an allergic skin reaction.Precautionary statements: Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/eye/face protection. Wear protective clothing. Avoid breathing mist/vapours/spray. If skin irritation or rash occurs: Get medical advice/attention. IF ON SKIN: Wash with plenty of water. Take off contaminated clothing and wash it before reuse. Dispose of contents/container in accordance with local/regional/national/international regulations.
      Show More blue down arrow Show Less blue up arrow
      558283 Rev. 7
      Components
      Down Arrow Up Arrow
      Description Quantity/Size Part Number
      Human IL-12p70 Capture Bead E5 N/A 51-9005304 N/A
      Human IL-12p70 PE Detection Reagent N/A 51-9004063 N/A
      Human IL-12p70 Standard N/A 51-9003505 N/A
      558283 Rev. 7

      Please refer to Support Documents for Quality Certificates

      Global - Refer to manufacturer's instructions for use and related User Manuals and Technical data sheets before using this products as described

      Comparisons, where applicable, are made against older BD Technology, manual methods or are general performance claims.  Comparisons are not made against non-BD technologies, unless otherwise noted.

      Non-IVD products are For Research Use Only. Not for use in diagnostic or therapeutic procedures.

       

      23-22940-00